Simplified Network Installations with Ethernet Cable Spools

Network installation procedures become lot easier and faster when you use the ethernet cable spools. If you are not familiar with the term spool, it is a circular shaped cylindrical structure onto which the cable is wound. If you have seen the bobbin of a sewing machine or the yarn spool, you can see the similarities. Having understood the meaning of ethernet cable spools, you will naturally wish to know the application and benefits of their usage. The spools are practically used everywhere in the network cable installations. The size of the spool may vary depending on the distance to be covered.

ethernet cable spoolsEthernet Cable Spools – Easy Installations

Spooling makes it easy to draw out the cables from them according to requirements. Their primary purpose is to prevent the cluttering of cables on the floors. The second reason is to protect the cables from accidental damages. You can easily visualize an example of possible damage in the network cable installation site. Assume you are a network engineer installing the cables within a warehouse. The bulk of cables are spread all over the warehouse floor while you are busy in the installation and clamping of the cable to the wall. A moving trolley within the warehouse tramps all over the cable and damages it. Now you need to replace the entire cable! On the other hand when you use the ethernet cable spools you can easily prevent such damages.

  • Ethernet Cable Spools Racks: – The racks contain multiple spools with different cables drawn through them. All of them can be drawn and their ends joined together with a tape. By pulling the one end of the taped cables you can make the spools rotate in an easy motion. They are used for installing multiple ethernet cables between two ends of the network in parallel.
  • Simplified Crimping Procedure: – By using the ethernet cable spools it is possible to crimp all the cables in one shot. As a network engineer you might need to connect the multiple cables to different computers within a single department. The typical scenario of such network can be seen in a large network where every cable from the main server is connected to the switches in different departments. Each department might have 5 to 6 computers to which the cables have to be connected. Then you can use the ethernet cable spools to install the cables in one shot. Then the crimping patterns of all the cables need to be uniform in both the ends. One set of ends will be connected to the switch ports, while the other set of ends will be connected to the individual computers. Maintaining a uniform code in crimping can be a tough task for you. When you use the ethernet cable spools you can visually inspect the end of each cable and keep all of them uniform.

    ethernet cable spools

  • Easy to Store: – The ethernet cable spools make it easy to store the cables once they have been taken out of their sealed boxes. You can literally pile them on each other, since they are made from break proof plastic or wooden material.